Avisoft logo


Create labels from digital input events

This dialog box allows defining digital input events that should be saved a .wav file labels, which can later be viewed in SASLab Pro.

To activate this mode of operation, the option enable creation of labels must be activated.

digital input : Select here the digital input (or the TRG signal on RECORDER USGH) that should be used. The last option “DIO bits 0…7” will create individual labels for each bit.

event : Select here the slope or state of the digital input that should create the label. The options rising and falling slope will create single point labels, while the other two options low and high state will create section labels.

The accuracy of the label time stamps is limited by the duration of the input device buffer.
Avisoft Bioacoustics

last modified on 03 December 2018